This HHBD electric chain hoist includes an electrically driven running gear that is installed on the I-beam. The movement of the traveler on the beam can therefore move the loads to be lifted also in the horizontal direction.
We recommend using a specialist electrician to connect the traveler and hoist.
|
Load capacity
|
I-beam width
|
|
0,5 t
|
58-153 mm
|
|
1 t
|
58-153 mm
|
|
2 t
|
82-178 mm
|
|
3 t
|
100-178 mm
|
|
5 t
|
100-178 mm
|
HHBD electric chain hoists have a safety lock that stops the hook with the load 40 cm below the hoist. If the hook is unloaded, the chain is wound up completely. This must be taken into account when selecting the chain length.
Advantages of the HHBD electric chain hoist:
- Two speeds
- Degree of protection of the electric chain hoist and buttons: IP54;
- Noise level: 81 dB;
- Operation in humidity up to 85%;
- Operates at temperatures of -20/+40 °C;
- Long chain life and easy replacement;
- No chain drum;
- Load lifts vertically and does not sag;
- Hook limit switch in lower and upper limit position;
The product meets the quality requirements of the EU directive and is CE certified.
We will be happy to provide a complete data sheet with instructions for use for this electric chain hoist upon request.
.
- Reliable and high quality
- steel lifting chain
- compact
- without drum
- easy to install, easy to maintain, easy to change chain
- long service life
- noise level - 81 dB
- accessories included: electric running gear
- travel (trolley) - can be installed on the profile using the appropriate number of I-profile beams and thus move the lift and load in the horizontal plane
